March 8, 2007

Metric Conversion Tables

metric_chart.jpgThe fellows at Woodcraft have gone through the trouble of creating a nice chart of commonly used metric conversions. The chart covers length, area, weight, volume, and temperature. Included are conversions from metric to customary and from customary to metric.

Like the glue chart, this is good information to have handy in the workshop.

Doug Mahoney at Permalink | Comments (0) | social bookmarking

March 7, 2007

Plug Cutting Kit

plug_cut.jpgUsing wood filler to conceal ugly screw heads is tedious and unrewarding work. It’s time consuming and often takes more than one application. With tinted wood fillers, you are rarely lucky enough to get a color match and usually end up with visible spots on your finished product that detract from the look of the finished piece.

Your other option for filling screw holes is to use a plug. A plug is simply a piece of wood, the same size as the hole, tightly fitted and glued in place. Plugs are particularly useful on projects that are only getting stain, as opposed to paint. With a bit of care, you can match the grain of the wood and make your screw hole completely disappear. Or, you can make your plug out of a different kind of wood to simulate the look of a dowel.

There’s not much to plug cutting. Just drill out the correct sized hole, make the corresponding plug, glue it in, trim off the extra with a flush cut saw, and then to finish up, just give it a quick sand. After you’ve done it a few times, the process takes only a few moments.

We use plugs all the time. In doing so, we’ve come across a set of plug tools that we think would be handy for just about anyone with an interest in woodworking.

ArrowContinue reading: "Plug Cutting Kit"

Doug Mahoney at Permalink | Comments (0) | social bookmarking

March 5, 2007

Newborn 112D Caulking Gun with the Caulk Buddy - Review

newborn_caulkgun.jpgNewborn makes great caulking guns. They’re easy to use, relatively dripless, and have the right puncture and cutting tools needed to successfully open a tube of caulking. That said, it’s what comes with the Newborn 112D Caulking Gun that’s so fascinating to us. It’s a little plastic gizmo called the Caulk Buddy and it’s something of a revelation as far as applying caulk goes.

The Caulk Buddy is one of those products that you look at and immediately think, “What a dumb idea.” It’s this little thingy that you run over your caulking bead or the purpose of cleaning up the excess caulk and smoothing things out. We never had any real problems in the past using our fingers or a damp rag, so what’s the big deal? Well, we tried the Caulk Buddy and what we found surprised us.

ArrowContinue reading: "Newborn 112D Caulking Gun with the Caulk Buddy - Review"

Doug Mahoney at Permalink | Comments (0) | social bookmarking

March 1, 2007

Black & Decker introduces 8" Automatic Adjustable Wrench

bdwrench.jpgBlack & Decker has recently come out with this interesting looking tool. The 8" Automatic Adjustable Wrench opens and closes with the push of a button, allowing for a quick and easy adjustment, particularly in hard to see spaces. No more fumbling around with the crescent wrench while you're crammed between the toilet and the vanity.

The Automatic Adjustable Wrench operates on two AAA batterries which, according to Black & Decker, have a life span of about 650 cycles. It is made of hardened steel and is capable of delivering 220 ft-lbs of torque and is good for nuts up to 1 1/4" in size.

Doug Mahoney at Permalink | Comments (0) | social bookmarking

February 27, 2007

ZipWall Spring Loaded Poles - Review

zipwall.jpgAre you sick of your family yelling about dust every time you do even the smallest project in the house? We are, or rather, we were until we discovered the Zipwall Spring Loaded Poles . Now we have the capabilities of putting up a dust barrier in seconds and containing all of our dust and construction debris in one area.

The standard ZipWall pack comes with two telescoping poles with a foot on one end and a safe, non-marring pad on the other. The principal is simple; clamp a sheet of plastic on the top end and pressure fit the pole from floor to ceiling. Viola! No more sawdust on the curtains.

At first, we felt this product to be a bit on the expensive side; a set of two goes for about $120, but when you realize how fast, easy, and helpful they are, it’s really a small price to pay.

Doug Mahoney at Permalink | Comments (0) | social bookmarking

February 26, 2007

Estwing 16oz Leather STL Hammer – Review

hammer.jpgWhen it comes to hammers, you should get a good one. Don’t waste time with some junky thing that has a wobbly head after a few uses. A hammer is one of the most essential tools in the toolbox; it’s good for pounding nails, pulling nails, prying boards, demolition work. If you use your tools a lot, the hammer becomes an extension of your arm. So it goes without saying that you want a quality tool.

Estwing, one of the premier hammer makers, offers this bit of excellence. The 16oz Leather STL Hammer is perfect for everyone from the homeowner who tinkers to the full-time carpenter. Since the body is made up of one single piece of metal, the thing is nearly indestructible and ensures you’ll never have to deal with the head flying off at an inopportune time. In addition to it’s durability, the hammer has a great look and feel; the leather grip works great and the tool is so nicely balanced that holding it and swinging it just feels right.

It’s worth putting this hammer in just about any toolbox. If it’s not exactly what you are looking for, you should check out the other hammers that Estwing has. Without exception, they are all very high quality tools.

Doug Mahoney at Permalink | Comments (0) | social bookmarking

February 22, 2007

Leatherman - Review

Leatherman.jpgEveryone needs a Leatherman. It’s pretty much that simple. There are plenty of models to choose from, but when it all comes down to it, they’re all pretty similar; knife, screwdrivers, file, can opener, etc. We prefer The Blast, but that’s just what we’re used to. We know other people who are equally passionate about other models. If there’s something specific you want, like a diamond file, just find the Leatherman that suits your needs. But find one nonetheless. You’ll thank us for it.

It’s one of those things that, once you have it in your pocket for a while, you start to wonder how you ever got along without one. How many times have you been up on a ladder wiring a light and you realize that you’re looking at a flathead screw and in your hand is a Phillip’s head screwdriver? With a Leatherman in your pocket, there’s no more standing up there wishing you could levitate the correct tool into your hand like this guy. Crawlspaces, roofs, and under vehicles are other places where our Leatherman has saved painful, awkward, and time consuming trips back to the toolbox.

Now, we’re so dependent that we feel naked without it in our pockets. It’s essential. Also, if you’re worried about the size, there are little ‘squirt’ models as well, half the size for about half the price.

Doug Mahoney at Permalink | Comments (0) | social bookmarking

Join the Mailing List Newsletter
Enter your Email

Powered by FeedBlitz
Subscribe - RSS

facebook_badge.jpg twitter_badge.jpg

Recent Reviews
Recent Comments
james sanders: Borrowed Wagner paint eater from brother in law, working good read more
Bryan: Can you get the older molded stud 4 sure I read more
kevin kirkpatrick: I had a green Poulan for 20 years and it read more
Gary Schultz: Thinking about the red wing 2218. Will be doing a read more
Walt: How much does the 80 Volt Kobalt weigh? read more
Site Navigation

Visit our other properties at!


This weblog is licensed under a Creative Commons License.
All items Copyright © 1999-2017 Blogpire Productions. Please read our Disclaimer and Privacy Policy