Kreg Deck Jig
We've used a number of hidden deck fasteners and have gotten some mixed results. We've had some good experiences (Eb-Ty) and some not-so-good experiences (Tiger Claw). Even the successful Eb-Tys were labor intensive with us having to biscuit out for each and every fastener. The results were great, but the process was tedious.
So Kreg, masters of all that is jiggy, are entering the ring with their new Deck Jig and at a glance it looks like a fast, efficient way of doing things (on the one condition that you have 2 drills). Like every other product that Kreg sells, the Deck Jig boils down to a method of drilling and setting a screw at a specific angle. In this case, it assists with toe-screwing a deck board to a joist.
The jig is set up like other Kreg jigs with the special drill bit and the adjustable depth collar. There are three drilling holes, one for screwing straight on and the other two for angled screwing, like when two boards meet on a joist. The kit also comes with little board spacers, to ensure your deck boards are nice and parallel.
The one thing that worries us about this whole thing is that the jig uses a specialized drill bit (replacements are about $14). So if you're making your deck out of ipe (which is becoming more and more popular), there could be an added expense of additional drill bits. Spending a day drilling through a species of wood that has the same fire rating as steel doesn't bode well for the longevity of the bit. But then again, cutting biscuit slots in it is no treat either.
The jig costs about $100.
Available May 15th at Amazon.com
Read More in: Bits and Blades | Fasteners | Hand Tools
Share this Article with others:
Came straight to this page? Visit Tool Snob for all the latest news.
Posted by Doug Mahoney at March 24, 2010 5:00 AM